EN10216-5 Heat Exhaust Stainless Steel U Tube ASTM A789/ASME A249 , 1.5mm - 1500mm
ASTM A213 ASME SA213 ASTM A249 ASME SA249 ASTM A789 EN10216 - 5
Specifications:
- FOB PriceUSD 800 - 30,000/Piece
- PortNingbo or Shanghai
- MOQ0.5 Tons
- Supply Ability1000 Tons Per Month
- Payment TermsL/C,T/T,Western Union
- PackagingSeaworthy plywood cases or pallets
- Delivery2 - 15 days
EN10216 - 5 Heat Exhaust Stainless Steel U Tube ASTM A789/ASME A249, 1.5mm - 1500mm
Stainless Steel U - bend Tube :
ASTM A213 ASME SA213 ASTM A249 ASME SA249 ASTM A789 EN10216 - 5
Description:
U - Bend Tube are widely used in Heat Exchanger Systems. Heat - Exchanger Equipment on the basis of
Seamless Stainless U - Tubes and Welded Stainless U bend Tube is essential in strategically important and
critical felds - - - Nuclear And Petrochemical Machine Building.
The U - Bend Tube Comply With The Following Standards:
1. ASTM A688/ASME SA688
2. ASTM A803/ASME SA803
3. ASTM A556/ASME SA556
Applications:
U - Bend Tube are widely used in Heat Exchanger Systems. Heat - Exchanger Equipment on the basis of
Seamless Stainless U - Tubes and Welded Stainless U bend Tube is essential in strategically important and
critical felds - - - Nuclear And Petrochemical Machine Building.
The U - Bend Tube Comply With The Following Standards:
1. ASTM A688/ASME SA688
2. ASTM A803/ASME SA803
3. ASTM A556/ASME SA556
Applications:
The products are applied to trades such as papermaking, chemical industry, shipbuilding, petroleum,
electricity, food, pharmacy, natural gas, metallurgry, architecture, sewage disposal, environmental
protection, aerospace, heat exchanger, etc. Extensively.
Specifications:
Austenite
|
Duplex
|
Super Duplex
|
TP304/304L
TP316/316L
TP316Ti
TP317/317L
TP321
TP347
|
S31803
S32205
S32304
|
S32750
S32760
|
U - Bend Tubes Specification:
- TEMA RCB 2.31 Standard Of The Tubular Exchanger Manufacturers Association (9th Edition).
- ASTM A688/ASME SA688 Standard Specification For Welded Tubes Of Austenitic Corrosion Resistant
Steel Grade Designed For Feed Water Boilers.
- ASTM B163/ASME SA163 Standard Techinical Requirements For Tubes Of Nickel And Nickel Alloy For
Condensers And Heat Exchangers.
Bending Radius: From 1.5*OD (Outside Diameter) To 1500mm
When Ordering Tubes With Radius less or equal to 1.5*OD, It Is Necessary To Agree Precision Of Geometrics.
- TEMA RCB 2.31 Standard Of The Tubular Exchanger Manufacturers Association (9th Edition).
- ASTM A688/ASME SA688 Standard Specification For Welded Tubes Of Austenitic Corrosion Resistant
Steel Grade Designed For Feed Water Boilers.
- ASTM B163/ASME SA163 Standard Techinical Requirements For Tubes Of Nickel And Nickel Alloy For
Condensers And Heat Exchangers.
Bending Radius: From 1.5*OD (Outside Diameter) To 1500mm
When Ordering Tubes With Radius less or equal to 1.5*OD, It Is Necessary To Agree Precision Of Geometrics.
Straight Tubes Maximum Length: (Before Bending): 35000 mm.
Leg Length: Min 1 Meter, Max. 16500 mm (For Max R=1500mm)
Note: Other Size Are Available Upon Agreement.
Heat Treatment: Stress Relieved After U - Bending (Bending Area Plus 300MM For Each Leg).
Hydrostatic Test After U Bending: Maximum Test Pressure 600 Bar, Soaking 10 Sec. With
Dematerialized Water. Compressed Air Cleaning After Hydro - Test.
Dematerialized Water. Compressed Air Cleaning After Hydro - Test.
Packaging: In Strong Transport - Worthy Pre - fumigated wooden boxes of corresponding dimensions for
each tube Length, Radius, Diameter, According To PO requirements as well as wrapped In polyethylene
films With soft plastic caps on both end of Tube.
each tube Length, Radius, Diameter, According To PO requirements as well as wrapped In polyethylene
films With soft plastic caps on both end of Tube.
Competitive Advantage:
1. We offer you our best price with good quality of the materials.
2. We will deliver the materials strictly according to the the delivery date noted on the contract.
3. We also always have the huge ready stock for sell.
4. We have advanced NDT equipments for the tests such as Eddy Current test, Ultrasonic test, Hydraulic test and so on.
5.We have complete after - sale service to deal with the problems in time.
6. Wooden case package which is strong and suitable for sea transportation is our main method to pack the pipes.
And the economical packing method such as packing in bundles.
Related products:More>>
 |  |
