Showing posts with label Stainless steel stamping elbow. Show all posts
Showing posts with label Stainless steel stamping elbow. Show all posts

Sunday, December 18, 2016

Internal thread processing method of stamping elbow

Design and manufacture of a tap
The internal thread on the stamping elbow usually adopts tap for tapping processing. Because stainless viscosity is higher, chip breaking performance is poor, so prone to chip in the process of tapping scratch artifacts thread or tap the phenomenon such as collapse edge, affect the efficiency and the quality of thread. In order to prolong the service life of tap, improve the quality of thread machining, the following points should be paid attention to.

Sunday, November 20, 2016

Stainless steel elbow compared with carbon steel elbow

The material of stainless steel elbow, usually on the basis of the carbon steel elbow increased the proportion of Cr, Ni alloy, such as content ratio can reach more than 20%. Common steel grade are: 304、 304 L、 321、 316、 316 L、 1 cr18ni9ti、 0 cr18ni9, its chemical composition can keep the elbow surface for a long time will not rust, does not corrode.

Thursday, June 23, 2016

Processing method of stainless steel stamping elbow

Processing method of stainless steel stamping elbow has a good variety. Many also belongs to the category of processing machinery, use is the most pressing, forging method, roller processing method, rolling rolling method, abscesses, tensile test, bending method, and the combination of processing method. Processing is the organic combination of machining and metal pressure processing.

Sunday, May 8, 2016

Technical parameters of steel elbow pipe fittings by yaang.com

The corrosion resistance of the steel elbow pipe fittings depends on the alloy elements contained in the steel. Chromium is thesteel elbow pipe fittings was the basic elements of corrosion resistance, when the Cr content in steel reached 1.2%, chromium and the corrosive medium in the role of oxygen, on the surface of steel formed a layer of very thin oxide film (self passivation film), can prevent the steel matrix further erosion. Steel elbow pipe fittings will not produce corrosion, pitting, corrosion or wear. Stainless steel is still one of the highest strength materials used in building materials.

Thursday, January 21, 2016

The use of stainless steel stamping elbow technique By yaang.com

1, chromium stainless steel stamping elbow has must be corrosion resistant (oxidizing acid, organic acids, cavitation), heat-resisting and wear-resisting function. Who used for power station equipment decoration material, chemical, oil and other Settings. Chromium stainless steel stamping elbow poor weldability, should be detailed before welding, heat treatment of speaking of choose suitable welding electrode.

Wednesday, January 20, 2016

Stainless steel stamping elbow welding points for attention By yaang.com

1, due to the heating to guard against erosion between eyes, welding current shoulds not be too eve, 20% less than carbon steel electrode mercy, arc shoulds not be too long, interlayer cold quickly, with narrow bead advisable.
2, stainless steel stamping elbow sclerosing than eve after welding, convenient crack. If accepted with typical welded stainless steel stamping elbow, required preheat above 300 ℃ and 700 ℃ after welding at the mercy of slow cooling treatment. If cannot undertake the weldment heat treatment after welding, should choose stainless steel stamping elbow electrode.