The hydraulic bulge forming technology of stainless steel tee

Stainless steel tee's hydraulic bulging process is through the metal materials of axial compensation bulge out a kind of branch pipe forming process.

No mold design of the drawing process for stainless steel tee

Stainless steel tee of non die drawing process is a use of metal flow stress with temperature changes in the nature and the realization of flexible plastic processing technology, is a kind of high precision, high efficiency, low energy consumption, no pollution, no mold, no friction, no lubrication near net forming technology. Different tensile properties of different materials. The limit of the tensile rate is the ratio between the blank diameter and the diameter of the punch. Three stainless steel material control in 2.1 to 2.2 and carbon steel control in 2.15 to 2.5.

Three stainless steel material can be second times in deep drawing deep drawing, but unlike carbon steel, three stainless steel material is usually not the same degree of tension and the first time after the heat treatment, unless. Three stainless steel material requirements equipment strength is 1 to 2 times of carbon steel equipment.
Three stainless steel
In general, deep drawing by double acting hydraulic equipment. On the three stainless steel in dieless tensile deformation of wall thickness were studied, analyzed the influence factors and influence laws of three stainless steel in dieless drawing of wall thickness variation. The three stainless steel in dieless drawing wall thickness formula.
Zhejiang Yaang Pipe Industry Co., Limited (www.yaang.com) provides stainless steel elbow, stainless steel tee, stainless steel flange, stainless steel pipe, stainless steel reducer, such as size, affordable, welcome new and old customers to come to consult! If any inquiry about products, please feel free to contact us sales@yaang.com
Source: Zhejiang Yaang Pipe Industry Co., Limited (www.yaang.com)

And what are the advantages of stainless steel tee than stainless steel reducer?

(1) compared with stainless steel tee, stainless steel reducer can not only change the piping, still can make for piping of different point of view, and can smooth tube medium flow, reduce the pressure drop and temperature drop.

The introduction of tee By yaang.com

Stainless steel tee on both ends of the direction of the straight line with the diameter of one end of the vertical bifurcation for small diameter, for small diameter pipe connection. Tee pipe fittings can be divided into square edge, round edge and endless. Tee, reducing tee pipe fitting surface is divided into hot dipped galvanized, electric galvanized, galvanized three categories, and black tee.

The forming process of stainless steel tee By yaang.com

Stainless steel tee, also called pipe tee or tee fitting, tee joint, to branch pipe used in the main line. Stainless steel tee has such as diameter and reducing tee, equal tee to take over the end are all the same size; Reducing tee, director of the control of the same size and branch pipe to take over the size less than to take over the size of head. Tee is a pipe for pipeline branch. For using seamless tube manufacturing tee is usually adopted by the process has two kinds of hydraulic bulging forming and hot pressing.

3 Steps to Properly Measure the Diameter of A Stainless Steel Flange By yaang.com

You might be thinking right now, why is this important. Why should you learn the proper way to measure the diameter of a stainless steel flange? I mean after all how hard could it be to figure it out on your own. Well take a second to realize that there’s a lot at stake here. You’ve got equipment that’s incredibly expensive that I’m sure you don’t want to damage and your crew’s safety you have to take into consideration.

So, taking a second to read this article and learn how to measure the diameter of a stainless steel flange the right way. This will save you lots of money and heartache down the road.